1/4" NPT Female Weld Bung Aluminum (4 pack)

1/4" NPT Female Weld Bung Aluminum Pack of 4

1/8" NPT Female Weld Bung Aluminum (3 pack)

1/8" NPT Female Weld Bung Aluminum 3 pack

M10x1.0 to -4an Banjo Kit

Banjo Kit for M10x1.0 thread to -4 an male with crush washers .060" Hole in banjo bolt

M10x1.25 to -4an Banjo Kit

Banjo Kit for M10x1.25 thread to -4 an male with crush washers .060" Hole in banjo bolt

M10x1.5 to -4an Banjo Kit

Banjo Kit for M10x1.5 thread to -4 an male with crush washers .060" Hole in banjo bolt

Oil Drain Flange for EFR GT25 GT28 GT30 and GT35 w/ O-Ring Seal

Garrett GT25, GT28, GT30, and GT35 Ball Bearing Turbocharger Billet Aluminum Drain Flange with 1/2" NPT threads and o ring seal.  O Rind seal means no gasket to break up, fall apart, or leak.  This is your permanent solution.  Flange also...

Oil Drain Flange for T3 T4 S200 S300 w/ O-Ring Seal to -10AN

Billet 6061aluminum Oil drain flange to -10AN with an o ring seal so there is no need for a gasket.  These fit all standard T3 and T4 oil drain from Garrett, Precision, Turbonetics and Borg Warner S200 and S300 series turbos.  This is...

Oil Drain Flange for T3 T4 S200 S300 w/ O-Ring Seal to -12AN

Billet 6061aluminum Oil drain flange to -12AN with an o ring seal so there is no need for a gasket.  These fit all standard T3 and T4 oil drain from Garrett, Precision, Turbonetics and Borg Warner S200 and S300 series turbos.  This is...

Oil Drain Flange GT / GTX / EFR w/ O-Ring Seal to -10 AN

Billet 6061 oil drain flange for Garrett GT, GTX, GTX Gen2 and Borg Warner EFR turbos with an O Ring seal so there is no need for a drain gasket. Male -10 AN NOTE: This flange will not fit G series turbos.  

Oil Drain Flange S400 / S300 w/ O-Ring Seal to .750 Hose Barb

Billet 6061 oil drain flange for Borg Warner S400 and S300 turbos with an O Ring seal so there is no need for a drain gasket. Male 3/4" .750 Hose Barb  

Oil Drain Flange S400 w/ O-Ring Seal to -10 AN

Billet 6061 oil drain flange for Borg Warner S400 turbos with an O Ring seal so there is no need for a drain gasket. Male -10 AN  

Oil Drain Flange S400 w/ O-Ring Seal to -12 AN

Billet 6061 oil drain flange for Borg Warner S400 turbos with an O Ring seal so there is no need for a drain gasket. Male -12 AN  

Oil Drain Flange S400 with O-Ring Seal

Billet 6061 oil drain flange for Borg Warner S400.  Center hole is tapped 3/4" NPT Updated with an O Ring seal so there is no need for a drain gasket  

Oil Feed Flange for T3/T4 2 Bolt Oil Inlet

If your turbo has the football shaped flange with two through bolts on either side of the oil feed port like the picture shows, this kit is for you.  Garrett, Turbonetics, and Precision use this style oil feed with varying thread patterns making...

SRT-4 Neon Oil Drain Nubbin for GT Ball Bearing

Tig welded stainless steel flange and tube.  The flange bolts to your Garrett GT Ball Bearing turbos.  The tube size is 3/4"  This is the same nubbin we include in our SRT-4 Neon turbo kits.

SRT-4 Neon Oil Drain Nubbin for T3 T4 S200 S300

Tig welded stainless steel flange and tube.  The flange bolts to your standard T3 and T4 bearing housings, along with all S200 and S300 Borg Warner turbos.  The tube size is 3/4"  This is the same nubbin we include in our SRT-4 Neon turbo...

Vacuum Tee Double Barb 3-Pack

CNC aluminum vacuum Tee with double barb for 1/4" hose.  We've all used those black plastic tees that you find at your favorite local auto parts store at 2am, but here is the nicer, cleaner, and permanent solution. We machined this piece with a...

Vacuum Tee Single Barb 3-Pack

CNC aluminum vacuum Tee for 1/4" hose.  We've all used those black plastic tees that you find at your favorite local auto parts store at 2am, but here is the nicer, cleaner, and permanent solution. We machined this piece with a sharp barb so you...

Vacuum Tee Triple Barb 3-Pack

CNC aluminum vacuum Tee with triple barb for 1/4" hose.  We've all used those black plastic tees that you find at your favorite local auto parts store at 2am, but here is the nicer, cleaner, and permanent solution. We machined this piece with a...